The XILS 4

$185.00

The XILS 4
The XILS 4

‘The XILS 4’ by XILS Labs emulates a prototype that was never released, the EMS VCS4, based on two intricate and interacting VCS 3 (Synthi) cores. We also coupled these with the famous 256 analog Poly-sequencer.

GET EXTRA 10% OFF WITH THE COUPON CODE :

SP-BF-EXTRA10

Out of stock

‘The XILS 4’ by XILS Labs emulates a prototype that was never released, the EMS VCS4, based on two intricate and interacting VCS 3 (Synthi) cores. We also coupled these with the famous 256 analog Poly-sequencer.

GET EXTRA 10% OFF WITH THE COUPON CODE :

SP-BF-EXTRA10

Out of stock

Ultimate Analog Matrix Modular Synthesizer

Take the 2nd huge Pin Matrix, and its numerous additional modules:
Envelopes, LFOs, S&H, Voltage Processor, Pitch Tracker, Transient etc. Or the recreation of the unique, powerful 256 analog Poly-sequencer, intimately tied to the synthesis engines. Add to that the analog Chorus (3 modes), Delay, Phaser and the Spring Reverb, and the full picture emerges.

In the XILS 4, you can connect everything with everything, giving you more than 1140 possible different connections per patch. Did we say at Audio Rate?
It’s an endless source of inspiration for those who want to go deep into the heart of Analog Modular Synthesis.

It’s impossible to fully summarize what the XILS 4 can do, but, in short, here’s the list of the main modules:

  • 12 Aliasing-free Oscillators, grouped in 6 pairs, with Wave-shaping, Hard synchronization, + 2 additional Noise oscillators
  • 2 Analog Multimode Filters, Non Linear and Zero Delay behaviors, with 3 Modes (12/18/24 dB)
  • 4 Trapezoidal, looping, Envelope Generators (Switchable to standard ADSR)
  • 1 Polyphonic LFO (including 2 Oscillators, each one with two outputs, acting as an LFO at audio rate)
  • Polyphonic Ring Modulator and VCA engine
  • Cascade Mode: Synthesizer 1 can feed Synthesizer 2 engine inputs
  • 4 independent outputs feeding the Stereo Bus, each with one analog LP/HP filter
  • 2 Programmable Joystick Vector Controllers (up to 32+32 modulation targets)
  • Polyphonic Sequencer with 3 independent lines, Slew rates, 3 recording modes
  • Sequencer can behave as a modulation source
  • Pitch Tracker, Envelope Follower, Transient, Gate and Sample & Hold modules
  • Chorus, Delay, Phaser and Spring Reverb
  • 6 Play modes (including Unison 2/4/6), Polyphonic and Mono Portamento/Glissando/Legato, 2 different Keyboard Scalings, Polyphonic Aftertouch and VCA handling
  • Nearly 700 presets made by world-famous Sound Designers
  • Preset Database Engine (Find the right patch in a flash, create your own tags)
  • Comprehensive manual with Getting Started and Tutorial sections
  • More than 100 parameters map-able to midi controllers
  • More than 1100 possible connexions per patch ! ! !

With the XILS 4 research Synthesizer, things that were impossible yesterday become now possible, with never ending programming possibilities.Not sure you’re ready for modular monsters ?  This synthesizer includes a new preset factory library, with more than 350 presets that were especially designed for it, and also includes the XILS 3 factory library. It also includes tutorial patches, helping you to climb the first steps of your modular life.

Features

History: Why two synthesizers for the XILS 4 ?

Tim Blake told us about his old "Crystal Machine" combo: two linked AKS machines with hard sychronisation between oscillators. One was connected to the keyboard, and the other connected to the sequencer.  Peter Zinovieff also told us about a never released EMS prototype, the VCS 4: two linked VCS3!
We mixed both concepts, then added a lot of modules inherited from the XILS 3 V2.0: and so the XILS 4 was born!

History: XILS 4 combines Two XILS 3 synthesizers that interact in many ways. To understand the genesis of the XILS 3, a recreation of the famous EMS synthi synthesizer, we have to go back to… 1969.

1969: The PIN MATRIX REVOLUTION ( No More Cables Anywhere )

In a modular synthesizer, you can connect any module to another one. Peter Zinovieff, the visionary synth Wizard, established, with the EMS series, a new way to connect modules: The Pin Matrix. Just plug a pin in the Matrix, and the connection is set.

Advantages of these techniques were obvious, breathtaking: More inputs and outputs for each module. No more cables cluttering the synth panel. Easy to operate, easy to read, visualize, and build, your patch. No more roadies: The analog modular synthesizer suddenly became portable. Add to this the first Vector Synthesis experiments.

The XILS 3-4 series offers the same advantages, and even brings a lot more to the table. Now let’s take a look at the different modules.

The PIN MATRIXES:

As we saw, modules have to be connected through patch areas called Pin Matrixes.

The XILS 4 offers no less than 8 Pin Matrixes: 2* 256+256 points dedicated to the main audio synthesis, one for the trig connections, and 4 for the sequencer connections (one for the modulation and one for the trig connections) Experts will spot at once that, in the 2 extended Matrixes, you can freely define some sources and destinations in the last two rows of lines and columns, like S&H, or even Envelope Segments.

And, yes, that means even more fun, and ultimate tweaking possibilities!

Matrix Synthesizer:

The core of the synthesis is based on the original audio modules :


Six oscillators grouped in Three pairs

  • Hard synchronisation
  • One Low pass filter with 12, 18 and 24 db slope
  • One spring reverb
  • One Trapezoidal looping envelop
  • One Polyphonic Ring Modulator
  • One Noise generator
  • Two output static filters

Oscillators: Beyond the digital limitation, in a true analog emulation, as in all XILS-lab instruments, the freedom of the sound that one has in mind when listening to hardware analog synthesizers, the analog spirit has been preserved.

XILS 4 oscillators were modeled to reproduce, as closely as possible, the original waveforms.

The following figures compare the different waveforms of the original AKS model and those of the XILS 4.

As you can see, the raising front is sharp, but as the signal reaches its maximum, it becomes slower. This gives XILS 4 Oscillators a unique analog sound and character: soft and warm, yet very rich in harmonics.

Square 50 Hz AKS


Square 50 Hz XILS 3

Rampe 500 Hz AKS


Rampe 500 Hz XILS 3

The 18 and 24 dB low-pass types can self-oscillate, and internal non-linearities have been finely reproduced: It is faithful to the "zero-delay" behavior found in real life to give you a big smile when sweeping it.No synthesis can be done without a good filter: the XILS 4 multimode filter was modeled to reproduce the analog character of the original machine.

The PIN MATRIXES: As we saw, modules have to be connected through patch areas called Pin Matrixes.

The XILS 4 offers no less than 8 Pin Matrixes: Two 256+225 points dedicated to the main audio synthesis, one for the trig connections, and three others for the sequencer connections (two for the modulation and one for the trig connections) Experts will at once spot that, in the extended Matrix, you can freely define some sources and destinations in the last two rows of lines and columns, like S&H, or even Envelope Segments.

Thanks to these added matrixes, the sequencer can independently modulate the "right" or the "left" core!

Last but not least, the Keyboard trig can be delayed: the envelopes can be trigged at two different times.

And, yes, that means even more fun, and ultimate tweaking possibilities!

Main


Extended

Trigs

Sequencer

It’s never been so easy to layer two leads, or a Pad and an FX. Together with the Vector Synthesis, this means that you can create your own patches in the XILS 4 very easily and quickly, in an intuitive way!Build Layers, Mix and Match different patches in a flash: Each of the Left & Right synth engines has its own patch browser, in addition to the general patch browser, so you can load either of the two synth engines (Left & Right), any L/R part of any patch present, into your preset library.

The Extended Modules (Augmented Matrixity):

To increase the sound design possibilities, we have added 5 other modules intended to be connected via the Extended Matrix (2x225 new possible connections).


  • Two additional envelopes (Trapezoidal or ADSR)
  • One Tempo-syncable LFO
  • One Tempo-syncable Sample and Hold
  • One voltage processor (with a delay feature)

The Polyphonic Sequencer:

The Sequencer has been inspired by the EMS 256 sequencer, a powerful 3 layer/2 track device, with some unique features, like 3 independent slew rate knobs. Here again a few things were added, like Sequencer Lines acting as Modulation Sources in a special Matrix. Interactions that you cannot reproduce in even the most sophisticated DAW.

Note: The sequencer can modulate or trig both cores independently.


  • 6 independent Sequencer lines.
  • 3 Record modes ( Live, Step, Edit )
  • Make sure to watch the tutorial video to learn fast how to use it.

Vector Synthesis:

The Pin Matrix and looping analog envelopes weren’t the only innovative features of the EMS series. Vector Synthesis should definitely be added to the list. The Joystick, with its numerous inputs and outputs, should be regarded as a giant step toward Vector Synthesis, and what is now known as Macro controllers.

With the XILS 4 Joystick duo (yes each engine has its own Joystick), you can not only make fascinating real time controlled evolutive sequences or performances, but you can also find many interesting and varied patches nested in a single patch. Almost all XILS 4 factory library presets have been created to make use of the Joystick and other real time controllers.

The Effects:


The XILS 4 provides three warm and wide sounding audio effects.

  •  A Chorus (3 modes)
  • A Delay (Tempo Syncable)
  • A Phaser (with enhanced analog behavior)

Using the XILS 4 as an effect Processor:

The XILS 4 can also be used as a terrific effect processor. The plug-in inputs can be used directly, feeding the filters, or as audio rate modulation sources... endless possibilities. To increase the fun a little bit, we added 4 input audio processors, making XILS 4 a fantastic mangling machine!

  • Transient Follower (which generates trigs or envelopes)
  • Envelope Follower
  • Featured Gate
  • Pitch Tracker

This is only a very brief summary of what you can do with the XILS 4 Matrix Modular Synthesizer. We are fully aware that nothing can replace direct experience so, now that you are somewhat familiar with the XILS 4, you might want to try out the Demo version.

(Two options available: license/dongle free demo with limited features or fully featured but time limited license)

Warning: the XILS 4 is not a stand-alone application and requires a VST/AU/AAX compatible host application to function correctly.

SYSTEM REQUIREMENTS

The XILS 4 are available in the following formats (32 and 64 bits):

  • Mac OSX 10.8 and later : VST, Audio Unit,  AAX (32&64 bits, native)
  • Windows 7,8,10 ; VST, AAX (32&64 bits, native)

VIDEO DEMOS

XILS 4 : Using two Parallel synthesizers

First patch : Learn Matrix, Don't forget the trig

XILS 4 : Using two serial synthesizers

First steps with the Sequencer, live performance

Using the Sequencer Editor

PRODUCERS WHO BOUGHT THIS ALSO BOUGHT :

-55%
Osaka Sound
Osaka SoundJuice
$11.19
user
$99.00
New
user
$99.00
-49%
Skull Ushuaia
$11.19
-67%
Sean P
$7.69
user
$119.00
-68%
Trap Veterans
Trap VeteransStill Flexin 3
$6.99
-76%
user
$149.00
-70%
NNAudio
$14.97
Zack
$79.00

PICKS FOR YOU

-65%
LBandy Music
LBandy MusicThe Bloodiest Trap
$6.99
-44%
Major Loops
Major LoopsFuturism
$8.39
-67%
Cartel Loops
$6.58
-43%
Digikitz
$11.37
-62%
Smemo Sounds
Smemo SoundsCARTI Vol. 2
$7.69
-65%
LBandy Music
$8.74
-55%
Concept Samples
Concept SamplesWorld of Woodwind
$7.69
-67%
Producer Loops
Producer LoopsPop Star 5
$9.80
-53%
Godlike Loops
Godlike LoopsXanax Mode
$6.99
-20%
user
$79.00
The XILS 4

Out of stock

SPRING BIG SALE - EXTENDED ! Up to 90% OFF ALL PACKS & PLUGINS BROWSE DEALS
🌱 SPRING BIG SALE - Up to 90% OFF ALL PACKS & PLUGINS BROWSE DEALS